How to Add a Simpled TA-SP Bluetooth Remote Controller to the App

**Step-by-step guide to pair your Simpled TA-SP remote for easy one-button unlock. **

Original HubSpot URL: https://learn.simpled.uk/how-to-add-a-simpled-ta-sp-bluetooth-remote-controller-to-the-app

The Simpled TA-SP Bluetooth Remote Controller lets you unlock your smart lock with a single press, without using a phone, app, or key. It works within a Bluetooth range of up to 10 meters.

Important (Double-Sided Locks): If you have only one remote, it can be assigned to either the inside panel OR the outside panel — not both.

Step-by-Step Instructions

  1. Open the app

  2. Select the lock you want to add the remote to

  3. Tap Wireless Remote

  4. Tap Add Remote

  5. Set the validity period (time frame)

  6. Enter a name for the remote (e.g., “Front Door Remote”) and press Next

  7. Press and hold the locking key on the remote for 5 seconds until the status light flickers, then tap Next

  8. When the device appears with a “+” icon, tap it to complete the pairing

What to Expect

  • The remote will now control the selected lock

  • Pressing the button will unlock instantly (within range)

  • No further setup is required

Common Issues & Fixes

  • Remote not appearing in app: Press the remote button again to wake it up

  • Cannot add remote: Make sure you are connected to the correct lock

  • Remote not working after setup: Ensure you are within ~10 m of the lock

  • Double-sided lock: Confirm the remote is added to the correct panel

If you are still unable to add the remote, contact support for further assistance.